VP-10L Inline Vacuum Plasma Treatment System

產品介紹： Function configurationTechnical parametersModelVP-10LVP-10PDimensionL=1600、W=1010、H=1750 （mm）L=1600、W=1010、H=1750 （mm）Weight540 kgControlProgrammable logic controller (PLC)Vacuum pumping time15SApplicable product sizeWidth ≤ 350, length ≤ 370, height ≤ 18 (mm)Conveying height900±20 mmTra

面料：

型號： VP-10L

應用：

咨詢熱線： 400-660-7690轉1

應用範圍:

1. Remove dust and oil

2. Fine cleaning and anti-static

3. Improve surface adhesion

4. Improve the reliability and durability of surface bonding

產品特點:

1. Adjustable - use electric amplitude modulation for the conveying mechanism, and the width can be adjusted arbitrarily;

2. Inline conveying system - used for communicating with front and rear equipment;

3. Aluminum alloy - the vacuum chamber;

4. Ultra low temperature - the temperature is as low as 40 ℃;

5. Omnidirectional surface cleaning - different plasma can enter the ultra-fine slit for cleaning;

6. Environmental protection - no harmful substances are produced before and after treatment, and keep away from the harmful solvents to human body;

7. Stability - continuity and constancy to maintain the stability of machinery and equipment during operation;

8. Cleaning - remove dust and oil, fine cleaning and static electricity;

9. Excitation - improve the adhesion ability of the surface and greatly increase the surface energy of the object;

10. Platy stripping - AF / AS layer platy stripping.

技術規格:

Function configuration	Technical parameter
Model	VP-10L	VP-10P
Dimensions(mm)	L=1600、W=1010、H=1750	L=1600、W=1010、H=1750
Weight(kg)	540
Control	Programmable controller（PLC）
Time to achieve vacuum time (s)	15
Applicable dimension of product (mm)	Width ≤ 350, length ≤ 370, height ≤ 18
Conveyor height (mm)	900±20
Conveyor direction	□ Left → right (standard) □ Right → left
Conveyor drive mode	Stepping motor
Power supply	Three phase 380V
Rated power (kw)	3.5
Industrial gas	Oxygen, nitrogen and argon
Communication protocol	SMEMA
Time to release vacuum time (s)	≤ 5
Conveyor mode	Belt conveyor + cylinder conveyor
Require Air pressure (Mpa)	0.4-0.6
Display	10 inch touch screen
Radio frequency power supply (w)	0-500 (adjustable in range)	0-1000 (adjustable in range)